9 solder-in style high temp emi filters zs/zr series ?.128 dia. ?circuits available ?c & l the zs series provides effective filtering in the microwave frequency spectrum from 10 mhz through 26 ghz. designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical. in the ??section version an internal fer- rite bead element provides both induc- tance and series resistance (lossy charac- teristic) which improves insertion loss and provides superior transient performance. alternate lead lengths or special capaci- tance values may be ordered. custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. ?meets or exceeds the applicable portions of mil-f-28861/12. see qpl listings. ?high temperature construction with- stands 300? installation temperatures. ?features rugged monolithic discoidal capacitor construction. ?glass hermetic seal on one end with epoxy seal on the opposite end. ?high purity gold plating provides excel- lent solderability or compatibility with thermal and ultrasonic wire bonding. 1. plating: gold standard ? silver and solder coat available 2. material: case: cold rolled steel leads: alloy 52 steel 3. operating temperature range: -55? to +125? 4. insulation resistance: at 25?: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less at 125?: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. dielectric withstanding voltage (dwv): r-level designs: 2.0 times rated dc voltage class b, class s designs: 2.5 times rated dc voltage 6. dc resistance (dcr): .01 ohm, maximum 7. dissipation factor (df): 3% maximum 8. rated dc current: 5 amps, maximum 9. maximum installation temperature: 300? 10. supplied with 60/40 solder preform for easy installation 11. insertion loss for the ??and ??circuits are equivalent due to the saturation characteristic of the ferrite bead element at full rated current. at lower currents the ??becomes much more effective. specifications .128 .005 .020 .005 a .25 .03 b glass seal .156 .005 .030 .002 0.05 (.002) 3.25 (.128) 0.13 (.005) 3.96 (.156) 0.51 (.020) 5.08 (.200) 0.76 (.030) 6.4 (.25) 0.8 (.03) 15.88 (.625) 2.79 (.110) 18.16 (.715) notes: 1. outline drawing shows stan- dard zs configuration. also available with glass seal at the opposite end, zr reverse configuration. 2. mil-f-28861/12 style fs70 equivalent to standard zs configuration. style fs71 is r everse zr configuration. 3. for zs2 or zr2 l-section filters inductor always posi- tioned at epoxy-filled end. 4. metric equivalent dimensions given for information only. millimeters (inches) c zs1, zr1 circuit diagrams standard configuration zs2 (see note 3) glass seal end flange end zr2 glass seal end flange end characteristics applications dimensions circuit a b diagram ?005 nom. l .200 .715 c .110 .625 dash no. style 001 through 016, fs70 033 and 034 017 through 032, fs71 035 and 036 mil-f-28861/12 (see note 2) (see note 4)
solder-in style high temp emi filters zs/zr series ?.128 dia. ?circuits available ?c & l 10 insertion loss 2 per mil-std-220, +25? avx current dc cap 1 500 1 10 100 1000 10 p/n amp ckt voltage min. khz mhz mhz mhz mhz ghz zs1c2-501h 5 c 50 500 15 30 50 zs1c2-102h 5 c 50 1000 4 20 31 55 zs1c2-122h 5 c 50 1200 5 20 35 55 zs1c2-272h 5 c 50 2700 10 25 40 60 zs1c2-502h 5 c 50 5000 15 30 45 60 zs1c2-103h 5 c 50 .010 4 20 35 48 60 zs1c2-153h 5 c 50 .015 7 25 40 50 60 zs2c2-501h 5 l 50 500 15 30 50 zs2c2-102h 5 l 50 1000 4 20 33 55 zs2c2-122h 5 l 50 1200 5 20 37 55 ZS2C2-272H 5 l 50 2700 10 25 40 60 zs2c2-502h 5 l 50 5000 15 30 45 60 zs2c2-103h 5 l 50 .010 4 20 38 50 60 zs2c2-153h 5 l 50 .015 7 25 42 50 60 zs1a2-101h 5 c 100 100 3 20 30 zs1a2-501h 5 c 100 500 15 30 50 zs1a2-102h 5 c 100 1000 4 20 31 55 zs1a2-122h 5 c 100 1200 5 20 35 55 zs1a2-272h 5 c 100 2700 10 25 40 60 zs1a2-502h 5 c 100 5000 15 30 45 60 zs1a2-103h 5 c 100 .010 4 20 35 48 60 zs1a2-153h 5 c 100 .015 7 25 40 50 60 zs2a2-100h 5 l 100 10 510 zs2a2-250h 5 l 100 25 1015 zs2a2-101h 5 l 100 100 3 20 30 zs2a2-501h 5 l 100 500 15 30 50 zs2a2-102h 5 l 100 1000 4 20 33 55 zs2a2-122h 5 l 100 1200 5 20 37 55 zs2a2-272h 5 l 100 2700 10 25 40 60 zs2a2-502h 5 l 100 5000 15 30 45 60 zs2a2-103h 5 l 100 .010 4 20 38 50 60 zs2a2-153h 5 l 100 .015 7 25 42 50 60 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor r esonances and other design constraints. note: a vx filters' standard configurations (e.g. zs, ys, xs, ws) have the hermetic glass seal opposite the flange end. all parts are capable of the reverse configuration with the glass seal at the flange end. all parameters are otherwise identical. the part number changes from ??to ??(e.g., standard = zs 1c2-153h; reverse = zr 1c2-153h). for special multi-unit assemblies see multi-component filter brackets section. specifications continued
11 solder-in style high temp emi filters zs/zr series ?.128 dia. ?circuits available ?c & l insertion loss 2 per mil-std-220, +25? avx current dc cap 1 500 1 10 100 1000 10 p/n amp ckt voltage min. khz mhz mhz mhz mhz ghz zs1b2-100h 5 c 200 10 410 zs1b2-250h 5 c 200 25 1015 zs1b2-101h 5 c 200 100 3 20 30 zs1b2-501h 5 c 200 500 15 30 50 zs1b2-102h 5 c 200 1000 4 20 31 55 zs1b2-122h 5 c 200 1200 5 20 35 55 zs1b2-272h 5 c 200 2700 10 25 40 60 zs2b2-100h 5 l 200 10 510 zs2b2-250h 5 l 200 25 1015 zs2b2-101h 5 l 200 100 3 20 30 zs2b2-501h 5 l 200 500 15 30 50 zs2b2-102h 5 l 200 1000 4 20 33 55 zs2b2-122h 5 l 200 1200 5 20 37 55 zs2b2-272h 5 l 200 2700 10 25 40 60 specifications 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor r esonances and other design constraints. note: a vx filters' standard configurations (e.g. zs, ys, xs, ws) have the hermetic glass seal opposite the flange end. all parts are capable of the reverse configuration with the glass seal at the flange end. all parameters are otherwise identical. the part number changes from ??to ??(e.g., standard = zs 1c2-153h; reverse = zr 1c2-153h). for special multi-unit assemblies see multi-component filter brackets section.
|
